How to control the wall with a networked PC ?

By default the software indicates:

Step 1: Share the 'setting' folder on the network at the PCWall level (Usually the folder setting is C:\program\Easymultidisplay\)

Step 2: Configure both PCs:

PC Control:

Firstly, keep the provided UDP port: 1234

Enter the IP of the PC Wall, often in the form: 192.168.0.34

Specify the network path of the shared 'setting' folder

PC Wall:

Firstly, keep the provided UDP port: 1234

Enter the IP of the PC Wall, often in the form: 192.168.0.34

Specify the network path of the shared 'setting' folder

Step 3:

-Restart Drag&Drop on the controller PC

-Run the EMDWall.exe file on the PC wall